AD-CM-DC Isolated Signal Converter

Description

A low-cost isolated signal conditioner module with DIP selectable input and output ranges. Accepts voltage and current inputs and can generate voltage or current outputs. DIN Rail mount.

Common Features

Industrial Signal Converter
2000V Opto-Isolation
Inputs : 0-5V, 1-5V, 0-10V, 0-60mV,4-20mA, 0-20mA
Outputs : 0-5V, 1-5V, 0-10V,4-20mA, 0-20mA
Selectable Dip Switch Ranges
Low Cost
DIN RAIL Mountable
Size (WDH) : 95 x 50 x 41 mm
Power : DC 24V ±10% (Internal SMPS included)
User Manual

Ranges

The signal converter AD-CM-DC will convert DC voltage or a direct current inputs to DC voltage or direct current output.
Inputs can be set using the SW1 DIP switch.
Outputs can be set using the SW2 DIP switch.
You may use Y terminal and B terminals for the inputs or the outputs.
Input Specifications
Input Signal
Input Impedence
Operating Temp. & Humid.
DC 0 to 5V
1M
-10 to 50 degrees Celcius, 10 to 95% RH
DC 1 to 5V
DC 0 to 10V
DC 0 to 60mA
DC 4 to 20mA
250
DC 0 to 20mA
Output Specifications
Output Signal
Allowable Impedence
DC 0 to 5V
Minimum of 2K
DC 1 to 5V
Minimum of 2K
DC 0 to 10V
Minimum of 4K
DC 4 to 20mA
Maximum of 500
DC 0 to 20mA
Maximum of 500
Input/Output Specifications
Factory Default Settings:
Input: 1 to 5V
Output: 0 to 20mA
Tolerance: +/- 0.25%
Maximum Input Setting Error: less than +/- 1%
Maximum Output Setting Error: less than +/- 1%
Maximum Temperature Variance: +/- 3% (Celcius)
Response Time: less than 50ms
Insulation Resistance: Minimum of 100 MΩ (Input/Output)
Withstanding-Voltage: AC 2000V for 1 min
Maximum Input Current: 90mA
Operating Temperature: -10°C to 50°C